Introduction:
When adding a Wind Vane to your Wind Data Logger package, there are a few things to keep in mind. If you are adding it to one of our Starter or Basic Packages, you will need an Anemometer and Wind Vane Splitter Board to attach your Wind Vane using a Cat5 cable. Self-Contained Outdoor Packages use our Arctic Ultraflex Blue™ Cable with bare ends and do not require the splitter board. If you are not sure about whether you need a splitter board, please call or email your questions to us.
We also offer a Z-Boom that allows you to offset your Wind Vane on the same mast as your anemometer. (The Z-Boom also allows you to install additional anemometers at different heights on the mast.)
Pricing:
|
Wind vane, #200R
|
|
Click on photo to enlarge
|
US Price: $245.00 USD Please call us at +1-507-454-2727 to place an order. Or click here to order online from #200R wind vane with rubber boot. Part Number: APRS6515 Shipping Weight: 1.00 pounds RoHS: unknown Origin: USA 
|
Accessories:
|
Wind vane cable, 30.5 m (100 ft)
|
|
Click on photo to enlarge
|
US Price: $35.00 USD Please call us at +1-507-454-2727 to place an order. Or click here to order online from Arctic Ultraflex Blue™, UV resistant, three Conductor / 20 AWG, power limited tray cable, 300 volt. This is our finest sensor cable and is exclusive to Off Grid Options / APRS World, LLC. It consists of three 20 AWG conductors protected by an ultra tough and highly flexible Arctic Ultraflex jacket. The cable remains flexible to -55° (-67°F). Conductors are red, white and black. This is ideal cable for our Wind Vane. Custom sizes available. Part Number: APRSC1009 Shipping Weight: 2.50 pounds RoHS: compliant Origin: USA 
|
|
Anemometer / wind vane replacement boot, green, molded vinyl
|
|
Click on photo to enlarge
|
US Price: $5.00 USD Please call us at +1-507-454-2727 to place an order. Or click here to order online from Replacement molded vinyl boot for our #40R anemometer and wind vane. Not compatible with APRS6500 series anemometer. Part Number: APRS6512 Shipping Weight: 0.13 pounds RoHS: compliant Origin: USA
|
|
Anemometer and wind vane splitter board
|
|
Click on photo to enlarge
|
US Price: $15.00 USD Please call us at +1-507-454-2727 to place an order. Or click here to order online from The splitter board allows up to three anemometers and one wind vane to be connected to the Wind Data Logger using normal CAT5 cables. It is compatible with our DIN rail mounting feet. Board dimensions are 72 mm x 44 mm (2.85 in x 1.75 in). This is needed when just the Wind Data Logger Module or one of the Starter or Basic Packages is used. It is not required when using any of the Outdoor Self-Contained Packages (AC, Solar or Polar edition). Part Number: APRS6510 Shipping Weight: 0.13 pounds RoHS: compliant Origin: USA
|
Mounting Options:
|
Z-Boom, 330 mm (13 in) Offset, with Holes Drilled
|
|
Click on photo to enlarge
|
US Price: $29.00 USD Please call us at +1-507-454-2727 to place an order. Or click here to order online from Z-boom for offset mounting of sensors. Standard size - 330 mm (13 in) offset. Custom sizes available upon request. Note: This version does come with the small holes pre-drilled. Part Number: APRS6608H Shipping Weight: 0.50 pounds RoHS: compliant Origin: USA
|
|
Stub Mast, 279 mm (11 in)
|
|
Click on photo to enlarge
|
US Price: $9.00 USD Please call us at +1-507-454-2727 to place an order. Stub mast for mounting #40R anemometer or wind vane. Standard in Wind Data Logger packages that include the #40R Anemometer. Note: This version does not come with the small holes pre-drilled. Part Number: APRS6611 Shipping Weight: 0.20 pounds RoHS: compliant Origin: USA
|
|
Anemometer to 1/2" NPT female adapter, stainless steel
|
|
|
Click on photo to enlarge
|
US Price: $35.00 USD Please call us at +1-507-454-2727 to place an order. Or click here to order online from Anemometer to 1/2" NPT female adapter, stainless steel. Part Number: APRS6607 Shipping Weight: 0.50 pounds RoHS: compliant Origin: USA
|
|
Anemometer to 1/2" NPT female adapter, aluminum
|
|
|
Click on photo to enlarge
|
US Price: $25.00 USD Please call us at +1-507-454-2727 to place an order. Or click here to order online from Anemometer to 1/2" NPT female adapter, aluminum, 6061-T6. Part Number: APRS6609 Shipping Weight: 0.50 pounds RoHS: compliant Origin: USA
|